PHILIPS 234E5QHSB

How to turn off the annoying blue screen logo to come out at the start of PHILIPS 234E5QHSB.

This Uza' want logo screen coming out of the screen each time turning on the power button. Honest any more this screen

should people often think that I do not want to see, so this time we will explain how to make this screen does not appear.

The previous review article is how to turn off the pesky logo screen wrote even found.

Way that is based on the two-channel thread " 2nd Philips LCD monitor comprehensive thread has a 436's and 439's of the written contents of the" to the reference. Thanks to our ancestors who taught me the way m (_ _) m is.

436: Unknown Device's : 2014/10/16 (Thu) 23: 45: 29.84 ID: vBuUswCf

>> 392

Gugutsu Tara I was in this do ￬ Philips LCD Monitor Service Menu Instructions 1.Press And Hold The "AUTO" Ando Amp; "MENU" Button, . 2.Then Press "POWER" Button To Turn ON The Lcd Monitor 3.Now Press the "mENU" button to open the OSD menu, at the bottom of menu, you get the extra selection, Go and select it, then you can login to factory service mode. Philips LCD monitor service menu instructions as "AUTO", "mENU please press the "POWER" button to the LCD monitor ON while holding down the "button. Press the "MENU" button to open the OSD menu, at the bottom of the menu, you will get an extra selection, move, select it, then, be able to log into the service mode of the factory I can do it.

[ads-post]

439: 437 : 2014/10/19 (Sun) 16: 45: 10.02 ID: z4t9uuEx

243V5QHAB / 11 I bought.
I VA panel of BENQ is video-ish slightly blue (purple?), 243V5QHAB / 11 is adjusted to feel like yellow is a little
shine is strengthened surface of the panel is in the glare pro-Hafugurea. Panel might change in the future surface treatment since it may vary in time shipment, but
others are switching, such as on-off and DVI and HDMI of the screen (it was Chinami GW2250HM of BENQ 10 seconds position) 1 second position >> 436 since put factory mode you indelible logo panel has been displayed in the following factory mode information Model 243V5QHA Scaler RDT2483XTD panel TPV-TPM236WF1-HJJP02N Version V100-20140708

Anyway In summary

, "AUTO" and "MENU" by pressing the power button while holding down the button put the screen and placed in a factory mode

it is possible to turn off the Once in the factory mode logo

seems that the trough. I tried immediately because it does not know to say in words. For the time being in the initial state OSD, it is displayed in the center of the screen.

First, enter the factory mode.

Screen turning the screen by pressing the "AUTO" button 'while holding down' and the second of the "MENU" button from the right end '' the power button of the No. 1 left end that is surrounded by a red circle in the off state.

This alone OK

When you enter the factory mode OSD is displayed in the upper left.

Since it is "factory" at the bottom of the OSD of the items fall within the item and press the MENU / OK button.

By operating the button of the arrow to go to the item called "Logooff", press the MENU / OK button.

If this "Logooff" to the Yes logo is not displayed. To Yes or No by operating the button of the arrow.

This in OK!

It is goodbye from the unsightly blue background logo screen.

By the way, start-up just because I turned off the logo becomes faster Toka do not have that sort of is. Logo is time which has been displayed will be much black screen well into the incidentally factory mode and return to the screen again to turn off the screen once in a normal state and turning. It not only just in the way if the honest from this screen user corporate image also feel that some have been bad ... I wish I think reflected also cool logo to be well tolerated if the black background instead of at least blue background this troublesome for the time being It is very great sick and that he was feeling that disappears every time you put the power in that the logo screen does not appear.