changed the LCD unit of Nexus7

To say that the glass ... rather than just a glass also will be the part that has a mechanism that can detect the location of touch called digitizer.
It The uncle Hui basis is the digitizer and say if you becomes an apparatus to specify the XY coordinates using the mouse specific equipment marked with the above tablet magnetic coil, but the distant past of the story.
Which it is still not decided to exchange work and we get the digitizer in about 3500 yen in the Yahoo auction.
This is the digitizer that arrived. I had to ship by non-standard-size mail.
We arrived in the state of only wrapped in an air cap.
Without any protective material such as a sandwich in the cardboard. It was good to not be folded in two.

First is the decomposition. Create a gap by inserting a such thin thing of the blade of the cutter knife in between the back cover and the frame. I think it fits the way around the plug hole of the analog output is that it is appropriate loosely.




It will open gradually from there.
Spear forcibly. Is Purimichibu.





Hesitation without something we will remove Innovation Murimuri.



Pakan Innovation Open the back cover.



Nexus7 open.
It is the receiving side of the Qi is the attached Hebari on the back cover.



I rose to go.
Remove the flat cable go take out the battery.


CPU is covered in copper foil tape.
I wonder if it was the heat sink under the copper foil tape? I forgot.

Digitizer is warmed by the dryer because it is attached to the frame with a pressure-sensitive adhesive.
Then remove the adhesive becomes soft and easy you made.
The place that has become soft and you peel off while the split Innovation Murimuri by inserting a pointed object. In fact, this, quite difficult and try. Glass of the digitizer is easy to break and crispy. Hot and not hot enough to not touch the adhesive does not become soft. To say that the tender is only a little. Other places also by heating the one place you will soon cool. Again, or useless in the cheap dryer of the piece of junk, or heat gun is necessary? In, but try to search nice to whether anxiety Nde videos on this had to remove quite casually to really. And while I think Naa's pushy because the way there is no being peeled off by inserting the tip of a precision screwdriver ...





Hmm?
I you are?



A゛a゛a゛a゛A Oh Aaaaa




was Chima' doing. We've divided the LCD
This is no good. Garbage decision.
There is no other to give up.


Garbage panoramic view was why now such a thing? No, But it's his bad you work not well studied. Apparently, it's like a exchange in the assembly with a LCD without the I usually glass breakage in the digitizer single item of Nexus7 (2013). It has been replaced by LCD also search videos. Why whether digitizer single item has been exhibited in the Yahoo auction unknown. Given the risk of the work time and work mistake peeling off the digitizer I feel is advantageous to replace in the assy. Exchange work even though there is not much difference in the parts price is profusely troublesome. You might wonder just have flow of parts for assembly without'm repair parts? LCD and digitizer is attached with a strong pressure-sensitive adhesive (double-sided tape?), Which is also available is like can be removed if the struggle becomes soft when heated but does not know well. The polarizing plate of the digitizer and LCD would strongly because it is sticking to try to peel it come off even polarizing plate and the LCD and glass backlight and the like. And there is no way to install .... Get the digitizer is member of the adhesive only in itself is not included. Be attached not adhered to will back a polarizing plate and a digitizer is cracked or scratched immediately in contact with each other, I think that transparency be adhered to leverage the thin double-sided tape is difficult to see become down. I do know good's a reliable positioning method that fails it before entering the air at the time of the adhesive. It digitizer separately in older Nexus7 I think that probably was able to exchange because they sell a lot, but still the removal of the adhesive is like was difficult, is better it has been replaced by LCD less if the price difference enough to write such effort is. And the pressure-sensitive adhesive look at something a movie seems to use a UV glue. Once but I have the gel type of UV glue you can not go back more than you've divided the LCD. Nexus7 only is not either or to play to buy or digitizer with LCD to refuse a single. Heart will be fastened to the inner voice that white work not doing such a thing. Yeah. Really. We play? Of course. Mon fool. First is the LCD of availability. Alibaba was exchange bought in communication sale of suspiciously perfect score Tteyuu Aliexpress you're doing. $ 50. Commodity panoramic view that this has arrived in Singapore Post. It had been wrapped in an air cap off the beaten track in a styrofoam box. It did you select a product that comes with a tool for the removal, but was not Toka adhesive for mounting. I'd like a double-sided tape will come attached to and apparently to order the frame. About $ 50. There was even more cheaper.



Unit front digitizer and LCD is a glass has been assembled.
The glass surface of the table has been protected by prima facie film for transportation at the time protection is attached.
Aliexpress is fee arrears.
It will be the payment note after confirming that there is no problem in the quality of goods that have arrived but is not accurate because deferred payment.
In other words, the more uneasy China quality. (In, Do not? Do good) in, we come to exchange work Tsu! !

To prepare the disassembled parts. Digitizer + LCD and electronic components other than the battery left is broken. On the inside of the back cover has stuck the receiving side of the Qi.


CPU board. I say small, is a little stingy.


In, you enter the replacement of the LCD unit. It rose frame and paste the double-sided tape. Perhaps exclusive goods is there, but the paste off the most thin double-sided tape that has been bought for the time being in the home center to the appropriate size.

It fits the LCD unit along the edge of the frame. It does not go well naturally slightly shifted because there is absolutely no margin. So snap forcibly held down I Murimuri the glass part with fingers protruding in Nokka' the edge.

Attach the Yara speaker Yara board that comes with a CPU board Yara camera to frame. In, end to close the back cover Innovation crackled Bachi' Tsu.

Yes, it rises contains a safe power supply. Exit and re-setup. Also from time to time the LCD display quality defects are told in my eyes did not stop seeing the problem. Postscript: measures article that is no longer able to auto-rotate the screen here . Articles that can not be charged with the iQ is here . Good child is so as not to imitate !　Promise of the old man!